Reduce the residual magnetism found in steel fuser, bending and blanking dies: the demagnetizer for mold and plates will guarantee ideal results with a single demagnetization cycle!
Demagnetizer designed for dies for presses and blanking machines
This demagnetizer is the solution designed specifically to reduce magnetism in fuser, bending and blanking dies.
Based on the technology of power impulse demagnetizers, the machine allows you to perform a complex multi-directional demagnetization cycle. Its system works on different steps in different directions; you will get a better demagnetization in every part of the mold. Each degaussing cycle can include up to eight directions.
You will eliminate the residual magnetism in the whole component in one execution!
Demagnetizer
with up to eight
directions for each
degaussing cycle
Demagnetizer with three waveforms: optimize your results!
To reduce residual magnetization, this demagnetizer allows you to work with three waveforms:
- Alternating Current (AC)
- Half-wave Direct Current (HWDC) with cyclical inversion of polarity to demagnetize difficult pieces
- Full Wave Direct Current (FWDC) with cyclical inversion of polarity to wholly demagnetize your pieces
You can also implement multiple multidirectional cycles in series by varying the waveform, thus optimizing the demagnetization results.
The characteristics of the demagnetizer for molds and plates
You can start and manage the demagnetizer using the control panel and the functional unit, designed for housing the dies, the power supply and the vector management.
Control panel
Using the control panel you can manage all the demagnetization parameters, configuring complex cycles consisting of several phases.
- Strong structure in Moplen in stove-enameled metal
- Control panel with touchscreen User Interface
- Control buttons
Functional unit
The functional unit consist of:
- Solid structure in stove-enameled metal
- Electrically isolated support for the molds housing
- AC, HWDC, FWDC magnetic generators, for delivering high currents at low voltages
- Switching system of demagnetization vectors
- Power connectors
Certifications
The demagnetizer for molds and plates is provided with CE mark and an English and Italian instruction manual (other languages on request).
Our best service for you
We’re available for all your needs, from the configuration of the demagnetizer to the after-sale assistance.
System configuration on your needs
You can use an already configured system, set for your production.
Training
in your company
You will understand the functioning of the machine in your company.
Guaranteed assistance, with a single point of contact
One year warranty. You will always have our staff support.
International shipping
You will receive the machine in your headquarters, in Europe, America, Asia and beyond.
Start satisfying your clients: reduce the magnetism in your pieces!
Request a free consultation: our specialized staff will show you how to start and manage the demagnetizer for molds and plates and lower the magnetism levels.
