The most advanced technology for the demagnetization through coils: Low Frequency ensures deep demagnetization
There are no restrictions on the size of the coil
Suitable for installation in production lines
Entirely made in Italy
Low Frequency Demagnetization Systems are the most advanced solution for the demagnetization of pieces of medium and large sizes, even with complex geometries, without the need to use the direct current in the component.
Unlike the Alternating Current Standard Coils, which work at a frequency of 50Hz and demagnetize the pieces only on the surface, these advanced degaussers work with frequencies from 0 to 30Hz and allow the effective demagnetization under the skin.
These special demagnetizing systems vary in magnetic intensity providing a magnetic intensity reduction for the simulation of the movement of the part from the tunnel.
The desired intensity and frequency are selectable at the discretion of the operator, and provided regardless of the presence or absence of the work piece and relative mass. The control of the degaussing process is total.
The Demagnetization Systems consist of two components: the control panel with power supply, and the Demagnetization Coil.
The control panel with power supply enables the management of all the demagnetization parameters and allows the user to configure several cycles composed in turn by several stages. The intuitive touchscreen panel interface allows for complete control of the machine.
On the color display, during the working cycle, the operator can view the output intensity performance indicators and the working frequency in real time, in addition to the visualization of service messages, faults and the setup and selection of the cycle of work.
The control panel features:
- Structure in painted metal in fire RAL 3000 (other colors on request)
- Control panel, user interface and touchscreen display
- Operator interfaces
- Design to interface with external signals (Photocell, Ready, etc.)
The coils are made with:
- Structure in Moplen, which is strong and tough
- Sides in painted metal in fire RAL 3000 (other colors are available on request)
- Forced ventilation systems, if needed
- Dimensions on request, with circular or rectangular shape
The machines are supplied with CE marks and instruction manuals in English and Italian (other languages are available on request).
For the system configuration, to ensure you are able to meet the requirements, we are available for a technical consultation and for the execution of demagnetization testing with different parameters on your samples. We employ stringent measures for the assessment of the actual effectiveness the process and the proposed machine.
Our technicians will provide the necessary support for any system integration in complex machines and for configuration and optimization of machine parameters.
We ship all around the world.